Load image into gallery viewer, 4-in-1 Par style LED light 1x30W Tri-color
Load image into gallery viewer, 4-in-1 Par style LED light 1x30W Tri-color
Load image into gallery viewer, 4-in-1 Par style LED light 1x30W Tri-color
Load image into gallery viewer, 4-in-1 Par style LED light 1x30W Tri-color

SKU: DOTZ-TPAR-SYS

4-in-1 Par style LED light 1x30W Tri-color

Saleswoman American DJ
shipping calculated at checkout.
Out of stock
Pre-order text

Free delivery over $200

Satisfaction guaranteed

Secure transaction

The Dotz TPar system is an all-in-one LED light bath system for mobile performers and stage lighting. This lighting system features a 4-T-bar lighting system with a 30-watt TRI COB (RGB) LED, producing wide, color-saturated light baths with LEDs lasting Extremely long life of 50,000 hours. The system illuminates a very large area with its 90 degree beam angle. You can also adjust the brightness to a 25 degree beam using the included lens kit.

Ideal for any traveling artist, the Dotz TPar system is easy to set up and take down. Plus, with low-heat LEDs, performers stay cooler on stage. The system includes a tripod, foot pedal, RF remote control and protective bag to protect your equipment.

In addition to its built-in programs and footswitch, the Dotz TPar system can also be controlled by an external DMX controller via its XLR inputs/outputs. The user can also mount two smaller fixtures on the T-bar and plug them directly into the back of the bar.

The system includes:

- 4x COB LED Par Wash Fixtures

- 1x control pedal

- 1x Lighting support

- 1x RF Remote Control

- 1x Standing bag

- 1x soft case for lighting system

Features :

- COB LED par light bath system with 4 Par luminaires

- COB (Chip On Board) technology produces powerful and smooth RGB color mixing with rich color palettes.

- Smooth RGB color mixing (fast or slow color changing)

- Ideal for stage lighting, bands, nightclubs and mobile performers.

- Emits less heat on the performers on stage than conventional stage lighting

- 4 Operating Modes: Sound active, auto run, built-in programs and DMX-512

- Standalone or master-slave installation

- L'option Pixel Flip change l'orientation des pixels

- 14 Integrated Programs

- 5 DMX channel modes: 3, 5, 9, 12 and 18 channels

- DMX digital display with 4-key menu for easy navigation

- 3-pin DMX input/output

- Strobe effect and pulsing LED

- Electronic gradation: 0-100%.

- 5 selectable brightness curves (Standard, Stage, TV, Architectural & Theater)

- Beam angle: 90 degrees

- Includes 25 degree beam angle lens kit

- Long-life LED (rated lifespan approximately 50,000 hours)

- Foot control features: Mode, cutoff and program change

- RF remote control up to 25 meters

- Light source: Each luminaire is equipped with 1x 30 Watt TRI Color COB LEDs of 30 Watt

- LUX @ 3M : 1345

- Power consumption: 144 W maximum (complete system)

- 2x rear power sockets or other lighting devices (120V = Edison or 230V = Shuko)

- Includes hardware to mount fixtures on top of bar

- Multi-voltage operation: AC 100V-240V 50/60Hz (IEC input)

- Dimensions (LxlxHxH) : 39,5 x 12,75 x 3,25 / 1000 x 320 x 82 mm

- Weight: 35 lb / 16 kg. (Fixing bar, bracket and controller)