The Phantom II Pro is designed to do one thing and do it well. It provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable device. Innovative low-power circuitry generates the higher voltage needed to power the microphones while maximizing battery life. The Phantom II Pro installs in-line between your microphone and a balanced line input on your equipment. Balanced lines provide increased immunity to external electrical noise, such as hum. Since a balanced system minimizes induced noise, it is the preferred method for connecting audio devices, particularly when long cable lengths are used.
The Phantom II Pro is an invaluable tool in the following application areas (but not limited to): home or professional recording studios, PA, PA, permanent installations, DJ, AV, podcasting and broadcasting. Use it with mixing consoles, audio processors, digital audio workstations or anywhere you need phantom power for your mics.
Features
XLR connectors for balanced inputs and outputs
Low power, high efficiency CMOS circuitry for long battery life using a standard 9 volt battery (alkaline recommended)
Powered by an external power source from an AC network
Robust extruded aluminum housing with accessible battery compartment
LED illuminated on/off switch
Low noise, low distortion circuit
Specifications:
Input Connections: Female XLR (2)
Output Connections: Male XLR (2)
Phantom power voltage: 48 Volts DC typical
Current limiting resistors: 6.98k Ohms (1%)
Power source: V battery (ANSI-1604A alkaline type recommended) or external power supply 7.5-12V AC/DC, < 150 mA Current drain: 10 mA - no load / 45 mA - typical (full load - 2 microphones ) Battery life: > 10 hours with alkaline battery - typical (full charge)
Dimensions (in): 1.85 H x 4.6 W x 3.9 D
Dimensions (mm): 47 H x 117 W x 99 D
Weight: 0.82 lb / 0.37 kg