Install an M-8Dx in the top slot of your rack, and the rear panel's eight switched outlets will power and protect all your equipment up to a 15-amp load. Illuminate your rack with two pop-up lights on the front panel. Monitor voltage using the meter's digital display.
A Merit Series power conditioner is the ideal low-cost AC power solution for any rack-mount system. The M-8Dx is equipped with two adjustable and sliding fixtures that allow you to discreetly illuminate your equipment on stage, in studios and in other dark places. A dimming button allows you to adjust the brightness of the lamp to the right level. The M-8Dx also features a bright red three-digit LED voltmeter that displays input voltage.
Applications:
- INSTRUMENT BANKS
You have a rack for your effects, preamps, a tuner...Are you going to plug it into the wall? A big spike and your equipment goes up in smoke. Furman's standard surge and surge protection protects your equipment from the spikes and surges that are so common during concerts and practice sessions. With Furman's standard-level RFI/EMI filtration, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp. Additionally, two pull-out lights allow you to see your rack without turning on the house lights, while the digital voltmeter lets you monitor the supply voltage.
- REGISTRATION
You don't know where this noise is coming from? Does your mix sound flat? With Furman's standard RFI/EMI filtration, you reduce the noise level caused by dirty AC power entering your console or DAW. Furman's standard-level surge and spike protection prevents your sensitive digital equipment from acting strange or burning up due to everyday voltage surges and spikes. You can even monitor voltage variations, as the digital meter lets you keep an eye on the supply voltage. With a capacity of 15A and nine outlets in total, it's enough to power your entire home studio.
- DJ EQUIPMENT
Bars, clubs and other event venues have some of the worst power around - from air compressors that turn on and off to light shows that pull current loads up and down, l AC power can be a strain on the circuits in your rig. Furman's level protection and standard filtration keep the bad stuff out. The dual sliding front panel also allows you to discreetly view your board and equipment without distracting from the show on the dance floor.
-PRO AUDIO
When you do shows, you never know what kind of power you'll get. Wear and tear on mobile platforms eventually takes its toll - which is why it's a good idea to plug into Furman's standard-level protection and RFI/EMI filtration. It ensures the safety and cleanliness of your equipment. It keeps your equipment safe and clean, while the digital voltmeter allows you to monitor the input voltage. Whether you're putting on a show at the local club or powering up the church orchestra for their next service, make sure you're giving them power they can trust.
Features :
- Noise filtration
- Protection against overvoltage
- 9 Total points of sale
- Digital voltmeter
- 15 A Rated power
- “Protection OK” indicator
- Wall wart spacing indicator
- Sliding lights on the front panel
Specifications:
- Family: Merit Series
- Line voltage: 120 (Volts)
- Number of points of sale: 9
- Number of isolated benches: 0
- Selling Point Descriptions: All 9 outputs are filtered and surge protected
- Rack mountable: Yes
- Rack ears included: Yes
- Meter(s) on the front: Digital voltmeter
- Front Media Light(s): Two 120 V incandescent bulbs, 4 watts each
- Control: Front panel - On/off switch - Light dimming button
- Voltage regulation: No
- Compliance: cTUVus
- USB charging: SOSO
- Low voltage trigger: SOSO
- AC Power Cord: 6' captive, 14 AWG, with 3-conductor Edison plug
- Dimensions: 19" L x 7.5" D x 1.75" H
- Weight: 6 lbs