Tube preamp The "Little Mark Vintage" has a tube preamp, to obtain a rich and warm sound full of harmonics. > Limiter control This control offers modern feedback when you turn it all the way up, or turn it to zero to create that old-fashioned behavior with its typical distortion you get when the Limiter effect is really low, and of course, you can also get everything. between. > New EQ setting / 3-WAY switch The 4-band EQ of the "Little Mark Vintage" has a new setting on the center of the frequencies, all tuned to provide a fairly balanced tone that easily cuts through the mix, plus a switch to 3-way with three useful EQ preset options to very quickly get a true "FLAT" setting, a "CUT" with scooped mids and enhanced bass and treble and a "HOLD" with scooped treble to get an old vintage style sound. > Real DI box The BALANCED DI "OUT" with transformer is optimized to give a pure, full, rich and linear sound on all frequencies. Although "Little Mark" amp heads already feature high-quality "DI" circuitry, the transformer enhances "DI" performance by providing a true "DI" enclosure inside the head, handling extreme transients without introducing distortion or coloring. >Key Features of the "Gold Line" As in the "Gold Line" series, the "Little Mark Vintage" features gold-plated circuitry and selected premium components, delivering the purest, cleanest sound you can imagine. > Mute and "ON/OFF" EQ The foot-switchable "MUTE" function is one of the most requested features for silently tuning or changing instruments. The optional Dual Footswitch also allows you to enable/disable the EQ section. > Size / Weight The "Little Mark Vintage" features the same compact SIZE and light WEIGHT as all heads in the "Little Mark" family. > MPT - Mark's Proprietary Technology Just about every bass amp on the market uses the same power amp from different manufacturers, which are not specifically designed for bass. At Markbass, Marco De Virgiliis has invested heavily in R&D to create proprietary power amp technology, specifically designed to respect and glorify the sound of your instrument.
INPUT CONTRIBUTIONS: impedance 500 Kohm, max. voltage 9 Vpp EFFECT FEEDBACK: impedance 33 Kohm, max. voltage 10 Vpp GAIN CONTROLS: range -46 dB to +23 dB MASTER VOLUME LEVEL DI LIMITER (from 0 to MAX) GROUND LIFT (switch on rear panel) PRE/POST EQ (switch on rear panel) 3-WAY SWITCH (FLAT / CUT / OLD) EQUALIZATION LOW: center frequency: 68 Hz; level: ± 16 dB LOW MID: center frequency: 400 Hz, level: ± 16 dB HIGH MID: center frequency: 2200 Hz, level: ± 16 dB HIGH: center frequency: 10 KHz, level: ± 16 dB THE LINE OUT OUTPUTS / DI: balanced XLR, 600 Ohm transformer output - Maximum voltage 12 Vpp EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ) TUNER OUT: unbalanced, max. voltage 2 Vpp SPEAKER OUT: combo speakon, 1/4 " OTHER WEIGHT: 5.51 lbs / 2.5 Kg WIDTH: 10.87 in / 27.6 cm DEPTH: 9.84 in / 25 cm HEIGHT: 3.27 in / 8.3 cm OUTPUT POWER: 500 W RMS into 4 ohms / 300 W RMS into 8 ohms POWER REQUIREMENTS: 100/120V; 240V - 50/60Hz (voltage is factory preset according to region of sale) The minimum ohm load for all Markbass heads is 4 ohms Markbass amps/combos are manufactured for sale and use in the country of purchase, and they are factory preset to that country's voltage. Due to approval issues, voltage cannot be changed. Rack ears are not supplied with this head. Product specifications are subject to change without notice.